Based on the AQL table
How many pieces are in this production batch?
What inspection level should be followed?
What AQL Limit did you set for major defects?
What AQL Limit did you set for minor defects?
# Sample Size
The inspector(s) will need to pick N/A samples out of the whole batch.
# Accept Point
(Maximum number of defectives samples)
The inspection is passed if all 3 conditions are met:
- No critical defect is found.
- Major defects: No more than N/A sample(s).
- Minor defects: No more than N/A sample(s).
© 2020 Copyright (C) Hong Kong AQI Service Co., Limited. All Rights Reserved.